9
Rinse aid
Using detergents with salt component
Detergents with salt component
If combined detergents with a salt component are
used, salt can usually be omitted up to a water
hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l).
If the water hardness is over 21° dH, special salt must
be used.
Switching off salt refill indicator/
water softening system
Switching off water softening system
If the salt refill indicator
`
is impaired (e.g. when
using combined detergents containing salt
component), it can be switched off.
〉
Proceed as described under “Adjusting the water
softening system” and set the value to
•
:
‹‹
.
The water softening system and salt refill
indicator are now switched off.
m
Caution
Never fill the salt dispenser with detergent. You will
destroy the water softening system.
Rinse aid
As soon as the rinse-aid refill indicator
h
is lit on
the fascia, there is still a rinse-aid reserve of 1 – 2
rinsing processes. Refill with rinse aid.
The rinse aid is required for stain-free utensils and
clear glasses. Use only rinse aid for domestic
dishwashers.
Combined detergents with rinse-aid component may
be used up to a water hardness of 21° dH (37° fH,
26° Clarke, 3.7 mmol/l) only. If the water hardness is
over 21° dH, rinse aid must be used.
1
Open the dispenser
92
by pressing and lifting
the plate on the cover.
2
Carefully pour rinse aid up to the max. mark in the
filler opening.
3
Close cover until it clicks shut.
4
To prevent excessive foam formation during the
next rinse cycle, remove any rinse aid which has
run over with a cloth.
PD[
