Gaggenau DF481500F, User Manual

Page: 60 / 72

aus
Troubleshooting
60
Fault Cause and troubleshooting
Excessive formation of
foam occurs. Hand washing-up liquid is present in dispenser for
rinse aid.
▶
Immediately add rinse aid to the dispenser.
→
"Adding rinse aid", Page 33
Rinse aid has been spilled.
▶
Remove the rinse aid with a cloth.
Detergent or appliance care product used causes ex-
cessive foaming.
▶
Change the brand of detergent.
Fault Cause and troubleshooting
Connection to home
network is not estab-
lished. WLAN on router is not active.
▶
Check the wireless network connection of your
router.
WLAN display is flash-
ing. Connection to home network is not available.
▶
Activate the wireless network connection on your
router.
Home Connect cannot
be implemented cor-
rectly. Home Connect set incorrectly.
▶
Please consult the documents supplied for
Home Connect.
Technical fault is present.
▶
Please consult the information about support in the
documents supplied for Home Connect.
Fault Cause and troubleshooting
Refill indicator for
rinse aid lights up. Insufficient rinse aid.
1.
Add Rinse aid → Page 33 .
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 33
Refill indicator for
rinse aid does not
light up. Rinse aid system is switched off.
▶
Set the amount of rinse aid to be dispensed.
Fault Cause and troubleshooting
Water is left in the ap-
pliance at the end of
the programme. Filter system or area under the filters is blocked.
1.
Clean the Filters → Page 48 .
2.
Clean the Wastewater pump → Page 64 .
Programme has not yet ended.
▶
Wait until the programme ends or cancel the pro-
gramme with
Reset
.