Transportation, storage and disposal
en-us
43
Issue
Cause and troubleshooting
Lid on the detergent dispenser
cannot be closed.
Detergent dispenser or lid are blocked by sticky detergent residue.
▶
Remove detergent residue.
Filling valves making knocking
noises.
Caused by the domestic installation. No fault present in the appliance. Does not af-
fect functioning of the appliance.
▶
Can only be remedied in the home installation.
Noise level varies
The noise level can vary, depending on what kind of dishes are loaded and where
they are placed.
▶
Make sure the dishware is loaded in the most secure way, resting on the tines
and not hitting each other.
Spray arm is striking dishes.
▶
Arrange dishware so the spray arms do not strike dishware.
With a small load the water jets directly strike against the tub.
▶
Distribute the dishware evenly.
▶
Load the appliance with more dishware.
Light items of dishware move about during the wash cycle.
▶
Position light items of dishware securely.
18.1 Clean drain pump
Large food remnants or foreign objects can block the drain
pump. As soon as the dishwashing water no longer drains
properly, the drain pump must be cleaned.
CAUTION
There may be some sharp debris, such as glass frag-
ments, blocking the drain pump.
▶
Use caution when removing parts for cleaning.
1.
Disconnect the appliance from the power supply.
2.
Remove the upper and lower rack.
3.
Remove the filter system.
4.
Scoop out any water.
Use a sponge if necessary.
5.
Pry the pump cover off using a spoon and grip it by the
crosspiece.
6.
Lift the pump cover diagonally inward and take it out.
a
Now you can reach the impeller with your hand.
7.
Remove any food remnants or foreign objects in the
area of the impeller.
8.
Insert the pump cover and press down .
1
2
a
The pump cover clicks into position.
9.
Install the filter system.
10.
Insert the upper and lower rack.
Transportation, storage and disposal
19 Transportation, storage and dis-
posal
Transportation, storage and disposal
19.1 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Turn off the water faucet.
3.
Detach the drain connection.
4.
Detach the water connection.
5.
Loosen any screws fastening the appliance to cabinet
parts.
6.
Remove the base panel if fitted.
7.
Pull the appliance out carefully, along with the hose be-
hind it.
