Basic Operation
en-us
27
Basic Operation
14 Basic Operation
Basic Operation
14.1 Protection against unintentional opera-
tion
Your appliance is equipped with a function that helps to
prevent unintentional operation, e.g. by children. After
starting the appliance, the door has to be closed within 4
seconds, otherwise the operation will be paused.
Note:
This function cannot be deactivated.
Requirements
¡
Pressing Start to begin a wash cycle
¡
Setting Delay time and pressing Start
¡
Opening the door while Delay time is active
¡
Opening the door during a wash cycle.
1.
Press
.
2.
Close the door.
a
The wash cycle will resume.
14.2 Opening the appliance door
1.
If the electric childproof lock is not activated, press on
the upper middle section of the appliance door.
2.
If the electric childproof lock is activated, press on the
upper middle section of the appliance door twice with a
short interval in between.
a
The appliance door will open automatically.
14.3 Switching on the appliance
▶
Press
.
The standard program is set by default.
If you do not perform any actions on the appliance for
10 minutes, it will automatically switch off.
14.4 Setting a cycle
To adjust the wash cycle to the soiling level of the dish-
ware, select a suitable programme.
▶
Press the right cycle button.
a
The cycle is set and the cycle button flashes.
14.5 Setting options
You can set options to complete the chosen wash pro-
gram.
Note:
The available options depend on which program is
selected.
▶
Press the button for the relevant option.
a
The option is set and the option button flashes.
14.6 Setting the electronic delay time
You can delay the start of the wash cycle by up to
24 hours.
1.
Press .
2.
Press or repeatedly until the display shows the
right time.
Depending on the setting of the time display, the end of
the program is shown on the display by "Finish in" (e.g.
3h 25min) or "Finish at" (e.g. 3:20pm). You can change
this setting in the Basic settings
.
3.
To activate the electronic delay time, press
.
Note:
To deactivate the electronic delay time, press
for approx. 4 seconds.
14.7 Starting the wash cycle
▶
Press
.
a
The wash cycle has ended when the display shows
"Finished!".
Notes
¡
If you want to add more dishware while the appliance is
running, do not use the collecting tray as a handle for
the upper rack. You might touch the partially dissolved
tablet.
¡
You can only change a cycle in progress if you can can-
cel it first.
"Terminating the wash cycle", Page 27
¡
To save energy, the appliance switches off automati-
cally 10 minutes after the end of the wash cycle. If you
open the appliance door immediately after the wash cy-
cle has ended, the appliance will switch off after 4 sec-
onds.
14.8 Interrupting the wash cycle
1.
Press On/Off.
The program is saved and the appliance switches off.
2.
Press On/Off.
3.
Press
to resume the wash cycle.
14.9 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
1.
Open the appliance door.
2.
Press
for approx. 4 seconds.
3.
Close the appliance door.
a
The cycle is cancelled and ends after approx. 1 minute.
