Gaggenau DF480700F, User Manual

Page: 36 / 48

en-us
Troubleshooting
36
Issue Cause and troubleshooting
Dishware is not dry. Cycle or cycle option has no drying phase, or drying phase is too short.
▶
Select a wash cycle with drying.
→
Page 12
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.
▶
Position dishware at an angle where possible.
The combined detergent used has a poor drying performance.
1.
Use rinse aid to improve drying performance.
2.
Use a different combined detergent with a better drying performance.
Extra Dry not activated to improve drying performance.
▶
Activate Extra Dry
→
Page 29
.
Dishware removed too early or drying process not yet ended.
1.
Wait until the program ends.
2.
Only remove dishware 30 minutes after the program has ended.
Rinse aid used has a limited drying performance.
▶
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not dry. Silverware not arranged properly in the silverware basket or silverware drawer.
Droplets can form on the contact points of silverware.
1.
Arrange silverware individually where possible.
→
Page 25
2.
Avoid points of contact.
Appliance interior still wet after
wash cycle.
Not an error. Condensation drying creates water droplets in the tub. This is normal.
Moisture in the air condenses on the inside walls of the appliance, runs off, and is
pumped out.
No action required.
Food remnants on dishware. Dishware was placed too close together or rack is overfilled.
1.
Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware.
2.
Avoid points of contact.
Spray arm rotation is blocked.
▶
Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms
→
Page 33 .
Filters are soiled.
▶
Clean the filters.
→
"Cleaning filters", Page 32
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
→
"Filter system", Page 32
2.
Twist filters into place.
Washing program selected too weak.
▶
Select a more intensive washing program.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 7
Dishware has been precleaned too intensively. The sensors then choose a weaker
program. Stubborn soiling cannot be entirely removed.
▶
Only remove large remnants of food and do not prerinse dishware.