en
Professional cooking function
12
¡
When you set a cooking time for a cooking zone in
which the Cooking sensor is activated, the cooking
time will not start counting down until the selected
temperature level has been reached.
Changing or switching off Switch-off timer
1.
Select the cooking zone and then touch .
2.
Use TwistPad to change the cooking time or set it to
to delete the cooking time.
11.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the cooking zones.
Switching on Timer
1.
Touch .
2.
Use the rotary knob to select the required time.
3.
Use to confirm the setting.
a
The time starts to elapse.
a
A signal tone sounds and the displays flash once
the time has elapsed.
Changing or switching off the Timer
1.
Touch .
2.
Change the running time using the rotary knob or
set it to
to delete the running time.
3.
Press to confirm.
Timer Plus
If you press for a few seconds before the signal tone
ends, the Runtime function is switched on. The display
shows the time that has elapsed since the end of the
programmed time for the Timer function. The time that
was previously set flashes Timer on the function dis-
play.
▶
Press and hold for a few seconds.
a
Runtime stops and the displays go out.
a
The function is switched off.
11.3 Runtime
The stopwatch function displays the time that has
elapsed since activation.
Switching on Runtime
▶
Touch .
a
light up.
a
The time begins to count down.
Switching off Runtime
1.
Touch .
a
The function stops. The displays continue to light
up.
2.
If you touch again while it is still orange, the time
continues to elapse.
3.
If you press and hold , the displays go out.
a
The function is deactivated.
12 Professional cooking function
You can use this function to set a preset power level
for each cooking zone.
Set down a suitable item of cookware within 9.5
minutes to apply the default value.
12.1 Activating the professional cooking
function
1.
Switch on the hob.
2.
Press .
a
The preset power levels light up on the cooking
zone displays.
3.
Set down a suitable item of cookware within
8 minutes. Once the cookware is detected, the cor-
responding cooking zone is selected. You can ad-
just the power level using the rotary knob.
a
The power level displays for the unoccupied cook-
ing zones start flashing if the adjustment time has
elapsed.
4.
Touch the symbol again within 90 seconds to ex-
tend the professional cooking function. If you do not
touch the symbol, the unused cooking zones are
switched off.
Notes
¡
You can also set the keep-warm function in profes-
sional cooking mode.
¡
If you set down unsuitable cookware, e.g. aluminium
cookware, the power level display flashes until you
remove the cookware. Check the section "Checking
the cookware" to see whether your cookware is suit-
able for induction cooking. →
12.2 Switching off the professional cooking
function
You can switch off the function in two ways:
Switching off immediately
▶
Press .
a
All cooking zones switch to the power .
a
The symbol lights up white.
Automatic switch-off
The function ends automatically: If, after 8 minutes, no
suitable cookware has been set down on one or more
cooking zones, and the corresponding cooking zone
displays start flashing for 90 seconds.
▶
To switch off the function, press twice.
If you do not touch , the professional cooking
function switches off automatically after 90 seconds.
a
lights up white and the cooking zones without
cookware switch to power level .
a
The cooking zones remain in operation at the set
power level.
12.3 Changing settings
▶
You can change the default settings in the "Basic
settings" menu →
.
Summary of Contents for CI282102
Page 1: ...en Information for Use CI 282 Induction hob Gaggenau...
Page 31: ......
