41
Notes
‒
If
“
appears in the display, the sensor for the
relevant hotplate must be pressed and held in order
to read the fault code.
‒
If the fault code is not listed in the table, disconnect
the hob from the power supply, wait 30 seconds
and connect it again. If the display appears again,
contact technical after-sales and tell them the
precise fault code.
The indicator on the tem-
perature sensor flashes
three times.
The temperature sensor is disconnected.
Press and hold the symbol on the temperature sensor for
eight seconds and then reconnect the temperature sen-
sor to the hob.
“Š‹‹‹
“Š‹‚‹
The operating voltage is incorrect/outside
of the normal operating range.
Contact your electricity provider.
—…‹‹
The hob is not connected properly
Disconnect the hob from the power supply. Ensure that it
has been connected in accordance with the circuit dia-
gram.
š“
The demo mode is activated
Disconnect the hob from the power supply. Wait 30 sec-
onds and reconnect it. Touch any touch control in the
next three minutes. The demo mode is deactivated.
Display
Possible cause
Troubleshooting
Do not place hot saucepans on the control panel.
