Gaggenau CI 283, Instruction Manual

Page: 18 / 60

18
en
Transfer function
u
Transfer function
Transfer function
You can use this function to transfer the power level and
set cooking time from one cooking zone to another.
To transfer the settings, move the cookware from the
cooking zone that is switched on to another cooking
zone.
This function can also be used on the flexible cooking
zones.
Note: You can find additional information on the correct
positioning of the cookware in the section on
~
"Flex
function"
1 Remove any cookware from the hob.
The hotplate indicator will start flashing. The
hotplate will not heat up.
2 Set down the cookware on a flexible hotplate within
the next 90 seconds. The new hotplate is detected
and the
ˆ
symbol lights up. The heat setting that
has been applied will flash in the hotplate display.
3 Select the new hotplate within 90 seconds using
the twist knob. The settings have been transferred.
Notes
– Move the cookware to a cooking zone that is not
switched on, that you have not yet preset or on
which no other cookware has been placed
previously.
– If the Flex function is activated by moving an item of
cookware across the flexible cooking zone, the
settings are automatically applied.
– When you place the cookware back in this position,
the same settings is used.
X|
Y| [|
[|
Z|
X|
[|
\|
Å
Y|
Z|