Gaggenau CI 263, Instruction Manual

Page: 19 / 24

19
Fixing malfunctions
Malfunctions are usually due to small details. Before
calling the Technical Assistance Service, you should
consider the following advice and warnings.
Normal noise while the appliance is
working
Induction heating technology is based on the creation
of electromagnetic fields that generate heat directly at
the base of the pan. Depending on how the pan has
been manufactured, these may produce certain noises
or vibrations such as those described below:
A deep humming sound as in a transformer
This noise is produced when cooking on a high power
level. It is caused by the amount of energy transferred
from the hob to the pan. The noise disappears or
becomes faint when the power level is lowered.
A low whistling sound
This noise is produced when the pan is empty. It
disappears when water or food is added to the pan.
A crackling sound
This noise occurs in pans which are made from
different materials superimposed on one another. It is
caused by the vibrations that occur ajoining surfaces
of the different superimposed materials. The noise
comes from the pan. The amount of food and cooking
method can vary.
A high-pitched whistling sound
This noise is produced mainly in pans made from
different materials superimposed on one another, and
it occurs when such pans are heated at maximum
power on two hotplates at the same time. The
whistling disappears or becomes fainter as soon as
the power level is lowered.
Noise from the fan
For proper use of the electronic system, the
temperature of the hob must be controlled. For this
purpose, the hob has a fan that starts working after
detecting excess temperatures at different power
levels. The fan may also work due to inertia after the
hob has been switched off, if the temperature
detected is still too high.
The noises described are normal, they are part of
induction heating technology and not a sign of
malfunction.
Indicator Malfunction Solution
none The electric power supply has been cut
off. Use other electrical appliances to check whether there has been a
power cut.
The appliance has not been correctly
connected following the connection dia-
gram. Check that the appliance has been connected correctly according
to the connection diagram.
Electronic system malfunction. If in the above checks, the malfunction is not resolved, contact the
Technical Assistance Service.
Ҥ
+ number
/
š
+ number
/
¡
+ number
Electronic system malfunction. Unplug the hob from the mains. Wait for 30 seconds and switch it
on again. *If the warning persists, contact the technical assistance
service.
”‹
/
”Š
There is an internal error in the opera-
tion. Unplug the hob from the mains. Wait about 30 seconds before
plugging it in again. *
•
The electronic system has overheated
and the corresponding hotplate has
been switched off. Wait until the electronic system has cooled down completely.
Then push any symbol on the hob. *
”…
The electronic system has overheated
and all hotplates have been switched off.
—‚
Supply voltage outside normal operating
limits. Please contact your local electricity company.
—ƒ
/
—„
The hotplate has overheated and has
switched off in order to protect its cook-
ing surface. Wait until the electronic system has cooled down sufficiently
before switching it back on.
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.