Gaggenau BX 480 112, Instruction Manual, Page: 19 / 52

19
Long-term timer
en
To terminate the whole procedure:
Set the function selector to 0 .
Setting the time functions for both
ovens simultaneously
Timer and stopwatch are not available if both ovens are
in operation.
Cooking time and Cooking time end can be set
simultaneously for both ovens.
Set a heating function and temperature for both ovens.
Use
Q
or
R
to select the desired oven and set the
cooking time.
If a cooking time has been set for only one oven, the
settings are shown on the left-hand side of the display.
The
Q
or
R
symbols indicate whether the settings apply
to the main or top oven.
Example: It is 12:00. A cooking time of 45 minutes has
been set for the main oven. The cooking time finishes at
12:45.
The
P
symbol is used to call up the overview. You can
select the main or the top oven here.
If a cooking time was set for both ovens, the overview
shows the settings for the main oven on the left and the
settings for the top oven on the right-hand side of the
display:
F
Long-term timer
Long-term timer
With the appliance in hot air mode, this function keeps
the temperature between 50 and 230 °C.
You can keep food warm for up to 74 hours without
having to switch the appliance on and off.
Bear in mind that food which spoils easily should not be
left in the oven for too long.
Note: To use the long-term timer, you will need to set it
to "available" in the basic settings.
~
"Basic settings"
on page 25
Setting the long-term timer
1 Turn the function selector to
ž
. To set the long-
term timer for both ovens, turn both function
selectors to
ž
.
2 Touch the
/
symbol.
The default value 24 hrs at 85 °C appears in the
display. Touch
I
to start
- or -
Change the cooking time, cooking time end, switch-
off date and temperature.
3 To change the
6
Cooking time:
Touch the
$
symbol. Set the desired cooking time
using the rotary selector.
4 To change the
5
Cooking time end:
Touch the
C
symbol. Use the rotary selector to set
the desired cooking time end.
5 To change the
q
Switch-off date:
Touch the
C
symbol. Use the rotary selector to set
the desired switch-off date. Confirm with
™
.
6 To change the temperature:
Use the rotary selector to select the desired
temperature.
7 Press
I
to start.
The appliance starts.
/
and the temperature appear in
the display.
The oven and display lighting are switched off. The
control panel is locked; no key tone sounds when you
touch the touch keys.
4
3
3
4
4
5
5
/RQJWHUPWLPHU