Gaggenau BSP 270, Instruction Manual, Page: 14 / 56

14
en
Water filter
3 Using the rotary selector, set the measured water
hardness. The value 12 is set by default.
4 Press
™
to confirm.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with
™
.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Cleaning the door panel
The door seal has been greased in the factory to make it
leaktight. There may be traces of grease left on the door
panel.
Clean the door panel with glass cleaner and a window
cloth or microfibre cloth before using the appliance for
the first time. Do not use glass scrapers.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
Heating up the appliance
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the empty
appliance with the door closed. One hour with hot air
H
+ 60% humidity at 200 °C is ideal for this.
+
Water filter
Water filter
Operation with or without a water
filter
You can use the appliance with or without a water filter.
If the water hardness exceeds 7°dH or carbonate
hardness 5°dH, we recommend the installation of the
descaling system GF 111 100.
Changing the water filter
Filter cartridges should be replaced regularly.
Replacement cartridges are available from after-sales
service or in the online shop (order number
GF 121 110).
The capacity of the filter cartridge depends on the
frequency of use of the appliance and your regional
water hardness. A message will appear in the display to
remind you when the filter needs to be replaced.
Regardless of the actual amount of water filtered the
filter cartridge needs to be changed after 12 months at
the latest.
1 Set the function selector to S . Select "Water filter
change" using the rotary selector.
2 The
œ
symbol is displayed. Confirm with
™
.
3 Change the water filter cartridge. Refer to the
instructions included with the filter cartridge.
Confirm with
™
.
4 "Water filter capacity" is shown in the display.
Confirm with
™
.
5 Turn the rotary selector to select the capacity of the
filter cartridge (between 100 - 9000 litres). Confirm
with
™
.
The water filter change is complete. Confirm with
™
.
The appliance is now ready for operation.