36
en
Pyrolytic self-cleaning
Starting the pyrolytic self-cleaning
function
1
Set the function selector to
S
.
2
The
œ
symbol is displayed. Press
™
to confirm.
3
The switch-off time at which the pyrolytic self-
cleaning function will be finished is displayed. If
required, you can alter the switch-off time using the
rotary selector. Press
™
to confirm.
4
Take all accessories out of the cooking
compartment and remove the worst of the dirt.
Press
™
to confirm.
5
Press
I
to start. The cleaning time will count down
in the display. If the switch-off time has been
delayed, the time until the pyrolytic self-cleaning
function starts counts down in the display. The light
in the cooking compartment remains switched off.
A signal sounds once the pyrolytic self-cleaning function
has ended. A message appears in the display. Once the
appliance has cooled down, wipe out the ash that has
been left behind in the cooking compartment with a
damp cloth.
Notes
–
The total duration of the pyrolytic self-cleaning
function comprises the cleaning time and cooling
period. The time for the relevant section of the
pyrolytic self-cleaning function counts down in the
display.
–
For safety reasons, the oven door locks
automatically. During cooling, the door mechanism
is opened as soon as the temperature falls below
200 °C.
Depending on the type of soiling, white deposits may
remain on the enamel surfaces. These deposits are
residue from the food and are harmless. They do not
affect how the appliance works. If required, you can
remove these residues using lemon juice and a soft
cloth.
Cleaning accessories with pyrolytic
self-cleaning
Gaggenau baking trays and grill trays are coated with a
pyrolysis-resistant enamel. However, for an optimum
oven-cleaning result, we recommend that you remove all
accessories from the oven before the pyrolytic self-
cleaning. This is the only way to ensure that the heat is
distributed evenly.
If you want to remove burnt-in residue from your baking
tray or your grill tray, you must observe the following
information:
Notes
–
Remove any coarse dirt, meat juices and food
residue before the pyrolytic self-cleaning. Food
residues, grease or meat juices may catch fire
during the pyrolytic self-cleaning.
–
In each case, only slide one baking tray or grill tray
into the lowest shelf in the oven.
–
Slide the baking tray or grill tray in as far as it will
go.
–
Wire rack, rotisserie spit, metal roasting dish,
baking stone, core temperature probe or other
accessories must not be cleaned in pyrolytic self-
cleaning mode.
–
Grill trays that have stainless steel bushes may
become discoloured during pyrolytic self-cleaning.
This has no effect on usability.
3\URO\WLFVHOIFOHDQLQJ
_
