14
en
Before using the appliance for the first time
K
Before using the appliance for the
first time
Before using the appliance for the first time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
–
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30 seconds. The "Initial settings"
menu will then appear automatically.
–
You can change the settings at any time in the basic
settings.
Setting the language
The preset language appears in the display.
1
Turn the rotary selector to select the required
display language.
2
Confirm with
™
.
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
Setting the clock
The time is shown in the display.
1
Set the desired time using the rotary selector.
2
Confirm with
™
.
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1
Use the rotary selector to select the desired format.
2
Confirm with
™
.
Setting the date
The preset date appears in the display. The day setting
is already active.
1
Set the day using the rotary selector.
2
Touch the
C
symbol to switch to the month setting.
3
Set the month using the rotary selector.
4
Touch the
C
symbol to switch to the year setting.
5
Set the year using the rotary selector.
6
Confirm with
™
.
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1
Use the rotary selector to select the unit you
require.
2
Confirm with
™
.
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with
™
.
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Heating up the oven
Make sure that there is no leftover packaging in the
cooking compartment.
To eliminate the new-appliance smell, heat up the oven
with it empty and the door closed. One hour with hot
air
H
at 200 °C is ideal for this.
Cleaning accessories
Before using the accessories for the first time, clean
them thoroughly using hot detergent solution and a soft
cloth.
