Gaggenau BMP 225, User Manual

Page: 15 / 36

15
Pause:
Operation can be paused with the
H
symbol. Use
the
I
symbol to continue.
Switching of f:
To stop the operation and cancel the settings, turn the
function selector to
0 .
Notes
‒ The sequential operation can be supplemented
with the combination mode.
‒ The 900 watt output setting can only be selected
once.
‒ The order of each setting is entirely up to you.
You can start with the cooking time, with the
microwave output or with the full surface grill.
‒ The full surface grill cannot be combined with 900
watts or 600 watts.
‒ If you open the appliance door during cooking,
the fan may continue to run.
End of cooking time
In grill mode, you can delay the cooking time end to a
later time. This function is not available in conjunction
with the microwave oven.
Example: It is 14:00. The dish requires a cooking time
of 40 minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50 and
switches off at 15:30.
Bear in mind that food which spoils easily should not
be left in the cooking compartment for too long.
Delaying the cooking time end
You have set the full surface grill, grill setting and
cooking time.
1 Use
C
to select the
5
"Cooking time end"
function.
2 Set the desired cooking time end using the rotary
selector.
3 Confirm with
™
.
A message is shown in the display to warn that a
cooking time end has been set. Confirm with
™
.
4 Press
I
to start.
The appliance switches to standby. The appliance
starts at the calculated time and switches off
automatically when the cooking time has elapsed.
Once the cooking time has elapsed, the appliance
switches off. An audible signal sounds. The signal
stops early if you touch the
™
symbol, open the
appliance door, or set the function selector to 0 . The
sequential operation has finished.
To change the cooking time:
Touch the
H
symbol. Use
C
to select the
6
"Cooking
time" function. Set the desired cooking time using the
rotary selector. Confirm with
™
. Press
I
to start.
To change the cooking time end:
Touch the
H
symbol. Use
C
to select the
5
"Cooking
time end" function. Set the desired cooking time end
using the rotary selector. Confirm with
™
. Press
I
to
start.
Deleting the settings:
Touch the
'
symbol.
To terminate the whole procedure:
Set the function selector to 0 .
&RRNLQJWLPHHQG
K
PLQ