Preparing the furniture panel
en
13
7.
To secure the appliance, screw the decorative pan-
els onto the mounting brackets.
The groove on the decorative panel should face out-
wards in each case.
Preparing the furniture panel
Requirements
¡
The thickness of the furniture panel is at least.
19 mm.
¡
The width of the furniture panel is 596–590 mm.
¡
The recommended height of the furniture panel is
142–156 mm.
¡
The furniture panel is made of wood or wood-like
material.
¡
The furniture panel has a handle or a recessed grip.
▶
Mark the centre of the top edge of the furniture
panel.
Installing the furniture panel
Requirement:
Wear gloves.
1.
Measure the width of the fitted unit and mark the
centre of the intermediate floor.
2.
Use the combination pliers to bend the hooks on
the front panel upwards by 90°.
3.
Mount the front panel on the appliance and push it
downwards as far as it will go.
4.
Check whether the front panel is mounted straight.
