11
For a large port, use the drain hose as it is.
1. For a small port, insert the rubber drain hose adaptor
into the drain hose end.
2. Obtain the Rubber Drain Hose Adaptor (J) spring
clamp from the Dishwasher Installation Kit
(do not
substitute)
.
3. Insert the dishwasher drain hose into the
end of the
drain hose
(see
Figure 12
. Be sure to fully insert the
drain hose.
4. Use the clamp provided to attach the Rubber Drain Hose
Adaptor to the house plumbing as shown in
Figure 13
.
The dishwasher can be secured into its enclosure in
2
ways:
NOTE: If your dishwasher opening width measures
>18″
(458 mm)
use the
TOP MOUNT
mounting methods.
If your
dishwasher opening width measures
18″ (458 mm)
use
the
SIDE MOUNT
mounting method.
Figure 13
Figure 12
Before installing the supplied countertop mounting
brackets, decide which method of securing the
dishwasher into its enclosure will be used. Once the
mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the
mounting brackets and the dishwasher.
Installation of Mounting Brackets
Installation of Rubber Drain Hose Adaptor
J
G
Top Mount
is used for countertops made of wood or other
materials that can be easily drilled
, or for openings
wider than 18"
. Orient the mounting brackets as shown
in
Figure 14
and position the two small tabs on the
mounting brackets over the two slots on the
dishwasher’s front corners. Push the mounting brackets
down firmly to insert the tabs into the slots.
Side Mount
i
s
for countertops made of marble,
granite, or other very hard materials that cannot be
easily drilled
. Also,
it is for for openings that are 18".
Insert a
side mount force distributor
(M)
in each side
as shown in
Figure 1
5
.
11
Figure 14
Top Mount
C
Torx T 20
Figure 15
Side Mount
M
Summary of Contents for 300 Series
Page 1: ...Installation Instructions Notice d installation 9001 597 251 0103 9001597251...
Page 2: ......
Page 27: ...29...
Page 28: ...30...
