Pitch Diameter Gage Operation Manual
Models MRP 1500/2500/3500
Copyright © 2018 Gagemaker. All rights reserved
3
Contents
Introduction
Technical Support
5
Product Information and Updates
5
Parts List
6
MRP Gage Setup
7
Setup Procedures for External Measurements
MRP Dimensional Limits Chart
8
Setting Up the MRP Gage for External Measurements
9
Zeroing the MRP Gage for External Measurements Using Rod Standards
13
Zeroing the MRP Gage for External Measurements Using Frame Standards
17
Zeroing the MRP Gage for External Measurements Using the MIC TRAC
21
Operating Procedures for External Measurements
Inspecting External Parts
28
Setup Procedures for Internal Measurements
MRP Dimensional Limits Chart
31
Setting Up the MRP Gage for Internal Measurements
32
Zeroing the MRP Gage for Internal Measurements Using Rod Standards
36
Zeroing the MRP Gage for Internal Measurements Using Frame Standards
40
Zeroing the MRP Gage for Internal Measurements Using the MIC TRAC
44
Operating Procedures for Internal Measurements
Inspecting Internal Parts
51
Inspection Criteria
Determining Diameter and Ovality Measurements with the MRP Gage
54
MRP Inspection Tolerance Guidelines
55
MRP Accuracy Measurement Factors
Thread Addendum Measurements
56
Standoff vs. Pitch Diameter Change
57
Setting Standard Calculations
Rod Style Setting Standard Dimensions
58
Rod Style Setting Standard Correction Factors
60
MIC TRAC Setting Standard Dimensions
61