4
REV. 5/22
GB745SHV/LB8 INSTALLATION TOOL
SERIAL # 1001 AND ABOVE
SPECIFICATIONS
Hand Held Weight
-
2.25 lbs. (1.02 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.620" (15.75 mm)
Rated pull load
-
6,300 lbs. (28.02 kN)
Noise level
-
Less than 80 dB(A)
Vibration
-
Tested–
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB745SHV/LB8 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB745SHV/LB8 is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of blind rivets, lockbolts
and MAGNA
-
GRIP® fasteners. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The head
assembly when held in hand weighs 2 1/4 lbs. (1.02 kg). The entire split handle installation tool weighs 10 1/2 lbs. (4.76 kg). It has
a
.620” (15.75
mm) fastener setting stroke.
The GB745SHV/LB8 installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB745SHV/LB8 does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
The GB745SHV/LB8 comes with 8 feet (2.4 m) of hose. Pull pressure varies with different length hoses. When ordering specify the
shortest length hose possible for your application this will provide optimum pull pressure. For example if your application only requires
5 feet (1.5 m) of hose order an installation tool with
-
5 suffix (GB745SHV5). Please consult our engineering department for specific applications.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY. (Contact Gage Bilt for more
nose assembly options).
