9
REV. 10/14
S/N: 2269 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
WARNING:
Dispose of hydraulic oil in accordance with all environmental regulations applicable in your area.
Remove nose assembly from tool before attempting disassembly of head assembly.
Remove end cap (743214). Push against threaded end of piston (743407) to slide it out of head cylinder assy (743108). Be careful not
to damage threads or cause burrs on polished piston (743407) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite® #242 and torque the
four button-head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
S834 - O'RING
401089 - BACK-UP RING
S834 - O'RING
743407 - PISTON
A-1135 - POLYSEAL
400792 - O'RING
S829 - O'RING
743214 - END CAP
200232 - DEFLECTOR
402482
BUTTON HEAD CAP SCREW
S572 - STAT-O-SEAL
743108
HEAD CYLINDER ASSY
400792 - O'RING
SEAL IN POLYSEAL
MUST FACE IN THIS
DIRECTION
