background image

11 

REV. 8/13 

 

 

Seller warrants that all goods covered by this catalog will con-

form to applicable specifications and will replace or repair, F.O.B. our 
plant, any goods providing defective from faulty workmanship, or material, 
for 6 months from date of shipment

 

Said warranty to remain in effect if and only if such goods are 

used in accordance with all instructions as to maintenance, operation and 
use, set forth in manuals and instruction sheets furnished by seller. 
 

Seller obligation under this warranty shall be limited to the repair 

or rework of the goods supplied or replacement thereof, at Seller’s option, 
and in no case is to exceed the invoice value of said goods. Under no 
circumstances will the seller be liable for incidental or consequential dam-
ages or for damages incurred by the buyer or subsequent user in repair-
ing or replacing defective goods or if the goods covered by this warranty 
are reworked or subjected to any type of additional processing. 
 

This warranty is void if Seller is not notified in writing of any re-

jections or defects within 6 months after the receipt of the material by the 
customer. 

THIS WARRANTY IS MADE IN LEIU OF ALL OTHER WARRANTIES 
EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY. 

 

WARRANTY 

 
 
 

DECLARATION OF CONFORMITY

 

 

WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN 

CONFORMS TO THE FOLLOWING STANDARDS AND DIRECTIVES. 

 

EN292 part 1 and part 2 

ISO 8662 part 1 

ISO 3744 

COUNCIL DIRECTIVE: 89/392/EEC, 91/368/EEC 

93/44/EEC, 93/68/EEC 

 

EQUIPMENT DESCRIPTION: 

GB734V SERIES FASTENER INSTALLATION TOOLS 

 

MANUFACTURER: 

GAGE BILT Inc. 

 

    

SIGNATURE: 

 
 

NAME:  BRIAN LEIGH 

      

 

 

 

 

 

PRODUCT 

MANAGER 

      

 

 

 

 

 

CLINTON 

TWP., 

MI 

U.S.A. 

      

  

MAY 

2010 

      

  

(586) 

226-1500 

GAGE BILT 

DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING CO. LOCTITE® IS A REGISTERED 
TRADEMARK OF HENKEL CORPORATION

 

 

Summary of Contents for GB734V












Reviews: