![background image](http://html.mh-extra.com/html/gage-bilt/gb722/gb722_original-instructions-manual_555868004.webp)
4
11/21 REV. 5/22
GB722/568 INSTALATION TOOL
SPECIFICATIONS
Weight (hand held)
-
2.5 lbs. (1.13 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron III, or equivalent.
Setting stroke
-
.300" (7.6 mm)
Rated pull load
-
4,770 lbs. (21.22 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested –
No Hazards Found.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB722/568 can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
The GB722/568 is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of
5/32” & 3/16”
only HUCKRIMP®
(krimpnuts) with a crimping action that deforms the nut to provide accurate installation loads. It (7.6 mm) fastener setting stroke and
a rated pull load of 4,770 lbs. (21.22 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB722/568 installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum
efficiency. At 90 psi. (6.2 bar) air pressure, the GB722/568 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY.