10
REV. 11/14
S/N: 1117 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly from tool before attempting disassembly of head assy.
Remove end cap (713217). Push against threaded end of piston (713211) to slide it out of head cylinder assy (713123). Be careful not
to damage threads or cause burrs on polished piston (713211) surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
