4
Rev. 4/23
GB703SRV INSTALLATION TOOL
S/N: 1398 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
1.50 lbs. (.68 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.81 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
2,200 lbs. (9.79 kN)
Vibration
-
less than 2.5 M/S²
The GB703SRV is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand weighs
1.5 lbs. (.68 kg). The entire split handle installation tool weighs 11 lbs. (5 kg). It has a
.780” (19.81
mm) fastener setting stroke.
The GB703SRV split handle installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 p.s.i. (6.2 bar) providing maximum
efficiency. At 90 psi (6.2 bar) of air pressure, the GB703SRV does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The GB703SRV comes with 3 feet (.91 m) of hose. The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air
hose fitting.
THE GB703SRV IS FURNISHED WITH A NOSE ASSEMBLY 6N
-
703
-
18SRV AND WITH A SPARE NOSE TIP (10202) AND FOLLOWER
(703431) TO CONVERT TO 4N
-
703
-
18SRV NOSE ASSEMBLY. ALL OTHER NOSE TIPS MUST BE ORDERED SEPARATELY.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703SRV can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
