4
REV. 9/18
GB2620PT / GB2620PTA INTALLATION TOOL
SPECIFICATIONS
Weight
- 9 lbs. 14 oz. (4.5 kg)
Hyd. pressure req'd
- 7,400 psi (510.2 bar) PULL
3.200 psi (220.6 bar) RETURN
Hyd. Power Source
- GB940 Powerunit or equivalent
Hydraulic Oil
- Fire resistant hydraulic oil conforming with
OSHA regulation 1926.302.
Setting stroke
- 1.437” (36.5mm)
Rated pull load
- 17,745 lbs. (78.9 kN) @ 6,500 psi (448.2 bar)
Noise level
- 81.5 dB (A)
Vibration
- Tested – No hazards found.
WARNING
:
Any other use is forbidden.
DESCRIPTION
The GB2620PT / GB2620PTA can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
WARNING
:
Do not operate in an explosive atmosphere.
ENVIRONMENTAL USE
The GB2620PT / GB2620PTA is a hydraulic installation tool designed specifically for the efficient installation of 1/2” diameter lockbolts only.
It weighs 9 lbs. 14 oz. (4.5 kg). It has a 1.437" (36.5mm) fastener setting stroke and a rated pull load of 17,745 lbs. (78.9kN) @ 6,500 psi. (448.2 bar).
The GB2620PT (Electric actuated) installation tool operates on hydraulic pressure developed by the GB940 powerunit set at 7,400 psi.
(510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure, enabling the tool to pull all the fasteners listed
on the selection chart without adjusting pressures. Powerunit may be set to the pressures only needed to pull your specific fastener
using the pressure gage assy (942280). The tool comes equipped with 2 feet (.61 m) of hydraulic hoses, couplings, electric switch and cord.
The GB2620PTA (Air actuated) installation tool operates on hydraulic pressure developed by the GB910 powerunit set at 7,400 psi.
(510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure, enabling the tool to pull all the fasteners listed
on the selection chart without adjusting pressures. Powerunit may be set to the pressures only needed to pull your specific fastener
using the pressure gage assy (942280). The tool comes equipped with 2 feet (.61 m) of hydraulic hoses, couplings, air actuator and tube.
ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE
NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 14).
