ND637 User’s Manual
6
6
3.
Network Configuration
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and
network settings of the devices. It even provides a convenient way to set the network settings for
multiple devices simultaneously using the batch setting function. Moreover, IP Installer can save the
network settings for all devices as a backup and restore them when necessary.
Preparation before IP Assignment
1.
Always consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
2.
Ensure the ND637 is powered on and correctly connected to the network.
3.
MAC Address: Each device has a unique Ethernet address (MAC address) shown on the label of the
device as the serial number (S/N) with 12 digits (e.g. 000429-XXXXXX).
4.
Although the IP Installer is able to find and configure any ND637 on the LAN except those that are
behind a router, it is a good idea to set the host PC to the same subnet. In order to connect to the
Web-based user interface of the camera, the host PC must be in the same subnet. For more
information about subnets, please consult your network administrator.
Using IP Installer to Assign an IP Address to ND637
1.
Once IP Installer has been successfully installed on the PC, double click to run the software
.
*0004290000
B1
Summary of Contents for ND637E
Page 22: ...ND637 User s Manual 21 21 3 Camera General ...
Page 27: ...ND637 User s Manual 26 26 3 Quad view 4 Quad with source view 5 Double view 6 Triple view ...
Page 29: ...ND637 User s Manual 28 28 4 Event ...
Page 43: ...ND637 User s Manual 42 42 7 System Information Lists of System and Network configurations ...
