6
21
Power on/off
2)
Press to enter or exit standby status.
Power on/off status panel indicator as below:
TV AV
ON: The previous power-off status
TV AV
OFF:All panel indicators off
Channel selecting
3)
Press CH switch to switch the four 2.4GHz channels.
Channels selected status indicator as below:
TV AV
Channel2 selected status
TV AV
Channel1 selected status
TV AV
Channel3 selected status
TV AV
Channel4 selected status
Note:
Only when the receiver and the transmitter are in the same channel, can the A/V
signal be normally transmitted.
For example:
If select CH4 via the transmitter (the CH-4 indicator is on), meanwhile open
the software of the receiver, right click the mouse, and the right key menu will pop up.
Then select
“
source selecting
”
to switch to CH4. Now the receiver and the transmitter are
sharing the same channel at the same time, as the picture below:
If wireless LAN like 802.11(WiFi device) is used in your house,
please select channel1 or channel4 and adjust 2.4GHz antenna to
avoid its interruption.
Avoid the external interruption via switching channels when the
program is externally interrupted.
Power: To power on/off the application program TVR PLUS. Right
click the TTrayIcon and select
“
remote off
”
. TVR PLUS and PC can be
powered off simultaneously.
¡ü
¡ü
¡ü
¡ü
5. Remote control instruction
5.1 Remote control panel
5.2 Remote control and shortcut keys instruction
SV
AV2
AV1
TV
Mute
Power
Channel number input
Return
Play/Pause
Still
REC
Stop
DIS
TV Wall
Panel
Full Screen
Attribute
P+
P-
V+
V-
Mute: The sound will disappear when press for the first time and be
normal when press again.
TV: Input source switch to TV. Note: Connect TV cable to the input port
of transmitter TXV2408.
AV1: Input source switch to AV1. Note: Connect video cable to the
input port of transmitter TXV2408.
AV2: Input source switch to AV2. Note: Connect video cable to MMI
AV input port of receiver UTV324.
SV: Input source switch to SV. Note: Connect SV cable to MMI S-Video
input port of receiver UTV324.
(Note: Every time when you select remote off function, you should
select
“
remote off
”
in the TTrayIcon, as the right picture.)
Connection and operation
Remote control instruction
Note:
