Gadhouse Brad Black Edition, User Manual

Page: 12 / 22

12
GETTING STARTED
Unpacking and power source
1. Remove packing material from Brad record player
2. Remove power adaptor from the gift box of Brad record player
3. Remove tie from adaptor
4. Set the record player properly on a flat, level surface
5. Open the dust cover (12)
6. Remove black-tie wrap from tone arm holder (9)
7. To begin using the turntable, remove the stylus guard by gently pull-
ing toward yourself from front of needle (13)
8. To continue using the turntable, release tone arm (15) from tone arm
holder clip (9) by gently pushing to the right. (However, when finished
playing, please lock the tone arm holder by gently pushing to the left and
protect needle by inserting the stylus guard)
9. Plug the power adaptor into an appropriate wall outlet
10. Plug the small end of the power adaptor into the power jack (17) on
the back of the Brad record player
11. Let’s rock and roll by turning the Power Control Knob (1) to the ON
position
CHARGING
Gadhouse Brad Black Edition comes with battery 2000mA/3.7V, and can
play either charge or discharge for playing everywhere you go!
1. Plug the power adaptor supply in Power Jack (17) for charging then
the light will turn to red light while charging. It will take approximately 2
hours each time for full of charge.
2. When Gadhouse Brad Black Edition fully charged, the light will stay
still. (Please note: When you feel the speaker is getting low volume or
the speed of vinyl play slow, please re-charge again.)
3. You can take Gadhouse Brad Black Edition everywhere you go and
able to play upto 3-4 hours.