2
INSTALLING THE WAVEPRO HARDWARE
& SOFTWARE DRIVERS
WavePRO interfaces are designed to be truly Plug and Play.
Installation in most systems should take only a few minutes.
If you have any difficulties with installation or operation of
WavePRO, check the Troubleshooting section later in this guide.
NOTE: if you are installing 2 or 3 WavePRO cards in a PC, you
will need to connect the Sync Cable between the cards
before installing. Please see page 6 for instructions.
STEP
Œ
Shut down and turn off your PC
Before you begin installing your WavePRO interface please note:
Static electricity can damage electronic components!
Take the following precaution before you begin installation:
Shut down and turn off the PC
but leave it plugged in
. Touch the
metal chassis of the PC to drain the static from your
bod
J
before
you touch the WavePRO PCI card.
Next, unplug the PC's power cable. Follow the steps in your PC's user
manual and remove the PC chassis cover.
GETTING STARTED
Here’s a list of stuff that’s included with this package:
Wave/824 Wave/496 Wave/424
WavePRO PCI card
ü
ü
ü
ü
ü
ü
Computer interface cable
(6 feet / 2 meters)
ü
ü
ü
ü
MIDI adapter cable
ü
ü
Patch Box: 4 in, 4 out half-rack
ü
ü
Patch Box: 8 in, 8 out rack-mount
ü
ü
AC Power Cube
ü
ü
4 Rubber feet for bottom of Patch
Box. For placing patch box on a
desktop instead of equipment rack.
ü
ü
ü
ü
WavePRO software drivers diskette
ü
ü
ü
ü
ü
ü
Applications & Demos software CD
ü
ü
ü
ü
ü
ü
User’s Guide (duh)
ü
ü
ü
ü
ü
ü
