20
n
Select the check box
“Float”
to enable
24 bit recording.
n
Select the desired
Wave/... In
Device for input.
n
Make sure that ‘monitor’ is
checked
.
n
Set the ‘Record Offset’ to
0
.
Samplitude 2496 also has a number of
buffer settings
for digital
audio. These can be left at their default value of
8192.
The
‘Buffer
number’
should be set to
6.
Setting up SAW for WavePRO
SAW is one of the original multi-track digital audio programs for the
PC and it is designed to fully utilize multi-channel cards. Here are the
steps to configure SAW for WavePRO.
n
Select the menu item, ‘Options | Audio Hardware Setup’. A
setup dialog box will appear.
n
For ‘Wave Device
1
’ select ‘
Ch 1/2 Out Wave/...
’
n
Make sure that ‘Device
1
interrupt Hook’ is set to ‘
None
’
n
For ‘Wave Device
2
’ select ‘
Ch 3/4 Out Wave/...
’
n
Make sure that ‘Device
2
interrupt Hook’ is set to ‘
None
’
n
Set ‘Preload Buffer Queue’ to ‘
8
’.
If you have difficulties, SAW has lots of good troubleshooting
information within the application help files.
Setting up Sound Forge for WavePRO
Sound Forge is a very popular digital audio editor that has a number of
advanced features. Use the following steps to configure Sound Forge.
n
Select the menu item, ‘Options | Preferences’. A tabbed dialog
will be displayed. Select the “Wave” tab.
n
For ‘Playback’, select the desired
Wave/... Out
device.
n
Leave the option, ‘Interpolate play position for inaccurate
devices
unchecked
. Yes,
WavePRO
is indeed an accurate
device
J
. Also, leave the ‘Play position bias’ at
0
.
n
For ‘Record’, select the desired
Wave/... In
device.
n
Again, leave the option, ‘Interpolate record position for
inaccurate devices unchecked and leave the ‘Record position
bias’ at
0
.
n
Set ‘Total Buffer Size (kilobytes)’ to
512
.
n
Set ‘Preload Size (kilobytes)’ to
64
.
