XScopes
User’s Manual
DS-XScopes-3.5
– December, 2014
Page | 34
7.
7.1
To send a BMP screen capture to a PC:
You can send a screen capture of the XScope to your PC using HyperTerminal. All the screen captures bitmaps in this
manual where generated using this method. The screen capture is done thru the XScope’s serial port.
Open HyperTerminal.
Enter a name for a new connection (example: scope).
Enter the COM port where the device is connected.
Select 115200 bits per second, 8 data bits, Parity None, 1 Stop bit, Flow control None. (See figure 56)
Figure 56: HyperTerminal Settings
In the Transfer menu, select Receive File.
Enter a folder where to save the file and use the XMODEM protocol. (See figure 56)
Summary of Contents for XScopes
Page 44: ...www gabotronics com ...
