GABOR TM-SS User Manual Download Page 3

3

• 

When installing this product, be sure to refer to the mounting instructions 

detailed in this manual; failure to abide by the mounting instructions may 
void the product’s warranty.

• 

Do not use this product for any flat-panel display other than what it is 

intended for; the exact specification, size parameters, and weight limits 
are found both on the product box and in the instruction manual. 

• 

It is strongly recommended that this product be installed by a qualified 

professional or installation contractor; Gabor takes no responsibility for 
any product damage or personal injury resulting from mishandling, 
incorrect mounting, faulty assembly, or improper use of this product.

• 

This product has been designed specifically for mounting directly on 

wooden studs or concrete walls; depending on wall type and material, the 
use of additional appropriate mounting hardware and/or accessories 
such as heavy-duty anchors may be required. 

• 

The supplied mounting hardware is not intended for use on metal studs 

or cinderblock walls, and may not be appropriate for old or weak walls; it 
is best to consult with a qualified professional to determine whether your 
wall is capable of supporting this bracket. 

• 

Do not mount the device on structures that may be affected by vibrations 

or noticeable impacts; do not install near a heater, fireplace, or any other 
source of direct heat energy.

• 

It is recommended that at least 2 people perform the installation process 

to prevent injury from mishandling or dropping of the product and/or 
flat-screen device.    

• 

This product may contain small parts which can possibly pose a choking 

hazard; keep out of reach of children and pets.

• 

Excessive exposure to liquids may damage the finish of this product; 

when cleaning this product, use only a mild detergent solution, and 
quickly wipe dry with a soft cloth. 

• 

All images are for illustrative purposes only.

Safety Warnings

Summary of Contents for TM-SS













Reviews: