GABOR MD-ASL15W, User Manual

Page: 14 / 20

14 Installation Instructions
Attaching the Mounting Arm Assembly
1. You can remove the shaft
cap from the shaft if you want.
2. Rotate the locking collar
to loosen it, and then slide
the collar to the approximate
height at which you want to
mount your monitor.
3. Lock the collar in place
by rotating it until fully
tightened.
4. Lift the arm/monitor
assembly and mount it onto
the shaft so it rests on the
locking collar, and use the
included 3 mm hex key to
fasten the set screw until
fully tightened.
5. Insert your monitor cable
into the cable guides on the
underside of the mounting
arm, and use the included
cable clip to secure your
monitor cable to the shaft
6. Return the shaft cap to the
top of the shaft.
A
M4x12
A
M4x12
A
M4x12