GABOR MD-ASL15W, User Manual

Page: 12 / 20

12
Flush Installation
Note: Before starting, make
sure the VESA mount,
mounting arm, and
monitor are facing the
proper direction.
1. Carefully place your
monitor facedown on a
flat surface.
Tip: To avoid scratching the
screen, place your monitor
on a soft cloth such as
a towel.
2. Align the mounting
holes in the VESA mount
with the corresponding
mounting holes in
your monitor.
3. Insert four of the included
M4×12 screws into the
VESA mount and use a
Phillips-head screwdriver
to fasten them until fully
tightened.
Continue to Mounting the
Arms on page 15
M4x12 (x8) M4x30 (x8)
M6x25 (x2)
13X5.5X16.5 (x8)
(x1) S=3mm (x1) S=5mm
A
B
(x2)
(x1)
Installation Instructions