When starting up, the “Comfort mode from 6am to
11pm” program is applied to all the days of the week.
To change the programming,
turn the knob to PROG.
The 1
st
time slot flashes on and off.
Quick programming:
To apply the same program to the following day, press
and hold the OK button for approximately 3 seconds
until the program of the following day is displayed.
Turn the knob to exit the programming mode.
Programming
Economy mode
for 1 hour
Comfort
for 1 hour
Go to the next
program change
Confirm and go
to the next day
1
st
time
slot
Time slot
consulted
Day
Program
profile
- 30 -
- 31 -
Turn the knob to
.
The days flash.
Press + or - to make your
choice, OK to confirm it and go
to the next setting.
Repeat the operations to set
the hours and minutes.
Turn the knob to exit the setting mode.
Turn the knob to:
-
to set the frost protection
temperature (5°C to 15°C, 7°C
by default),
-
to set the economy
temperature (10°C to 30°C,
15°C by default),
-
to set the comfort temperature (10°C to 30°C,
66.20°F by default),
Press + or - to make your choice.
Turn the knob to exit the setting mode.
Time Setting
Setting the temperatures (set-points)
Day
Hours
Minutes
Summary of Contents for CTP10
Page 20: ...39 38...