5
EN
2.- COMPONENTS AND ASSEMBLY
Feet Assembly
Carefully remove the heater from the plastic bag and carton.
Attach the two plastic feet to the bottom of the appliance with the 2 delivered screws.
Step 1: Put the feet into the right position
Step 2: Fix the feet with screws.
Place the heater on a firm and level surface.
3.- USING THE HEATER
Warning
the heater must not be operated without the
feet assembled
- Plug the power cord into a 220-240V~
electrical outlet.
- Press the power switch to 750W or
1250W depending on the required power, or
press both (750W + 1250W at the same time
for 2000W power. The indicator light will be
on.
Set the thermostat switch to maximum, and operate the appliance until the desired room temperature is reached. Then, turn
the themostat switch until the appliance switches off with an audible “click”. This set temperature will be kept almost const
ant
by the appliance switching on and off automatically. Please note that the appliance does not switch on unless the thermostat
setting is higher than the room temperature.
Front Cover
Power Switch
Thermostat Switch
Feet
Air Grille Outlet
Indicator Light
Thermostat Switch
Power Switch
