Gabarron ADL 5030/14, Installation Instructions And User Manual

Page: 11 / 12

3.- USING THE HEATER
The input control allows to lead the heat you want to store during the night.
On mild weather it is enough to set the input control at intermediate positions, you can set the input control at maximum pos ition
if necessary. In this position the heater stores the maximum energy.
Controlled storage fan heaters deliver their heat from a highly insulated core by means of a silent fan. This fan should be
managed by a good remote thermostat.
During the first cycles some odors are possible; in this case ventilate the room until they disappear.
4.-MAINTENANCE OF YOUR STORAGE HEATER
This controlled storage fan heater does not need any special care.
Dust accumulated on the heater surface can be removed using a wet cloth when the controlled storage fan heater is cold.
Do not use dissolvents or abrasive products.
Night storage heaters ADS are manufactured under an assured quality system using environment friendly procedures.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their materials in the right way.
WIRING
        





   

 
  
   





















 

  
 
