damaged, it must be replaced immediately by the manufacturer, an
authorised service centre or similarly qualified persons in order to
avoid a hazard. 6 - Keep the appliance and its electric cord away
from sources of heat and from heat-sensitive surfaces (plastic,
vinyl, etc.). 7- Do not hold or handle the appliance by the electric
cord. Do not wind the electric cord around the appliance, bend it or
twist it so as not to impair its correct functioning and thus
damage the appliance. Lack of compliance with the above
warnings and instructions could cause a short circuit and thus
irreparable damage to the appliance, as well as put the user’s
safety at risk. 8- Unplug the appliance when not in use and allow it
to cool down before storing it in a safe place. To disconnect the
appliance, unplug the electric cord from the wall power outlet.
9- To clean the appliance, always disconnect it from the power
outlet first and let it cool completely. When cleaning, do not use
aggressive products containing phenylphenol. 10- This appliance
should only be used for its intended purpose. 11- This appliance
has especially sharp professional blades, so use it carefully to avoid
injuries or lesions. 12- Always turn this appliance off before
changing one of its accessories. 13- For additional protection the
installation of a residual current device (RCD) having a rated residual
operating current not exceeding 30 mA is advisable in the electrical
circuit supplying the bathroom. Ask your installer for advice.
This appliance must not be used by people with reduced physical,
motor or mental capacity (including children), or with limited
knowledge of the appliance itself, unless such people have been
trained for its use or are under adequate supervision to ensure their
own safety. Children must be under supervision at all times to
ensure that they do not play with the appliance.
Do not use this appliance near bathtubs or other vessels
containing water.
9
10