Ga.Ma PROFESSIONAL IQ1 PERFETTO, User Manual, Page: 26 / 160

26
towards the back of the hair dryer for 10 seconds to remove all dirt trapped in the filters. After the 10
seconds have elapsed, the motor will stop.
• It will be possible to clean the hair dryer again with another automatic cycle after 30 seconds.
During self-cleaning, keep both the air outlet and inlet free of obstructions and away from any surface.
When the AUTOCLEAN sequence is complete, the procedure is finished and the hair dryer can be used normally.
MANUAL CLEANING (Fig. 9)
• Remove the metal filter at the back, and then the mesh filter.
• Place the filters in a container and spray them with liquid glass cleaner.
• Use the supplied brush: brush both sides (internal and external) well for 10 seconds, making sure to remove
particles, dirt, hairspray or other chemical substances stucke to the filters.
• Rinse throughly with water until all the cleaner residue has been removed. Dry the filters well.
• Insert the clean filters: first the mesh filter, then the metal filter. In both cases, check the arrows that indicate the
correct position of the filters.
IMPORTANT
• The filters must not be cleaned while they are inside the hairdryer.
• Do not use the hairdryer without filters, in order to avoid irreparable damage.
• Do not use the hairdryer if the filters are not completely dry.
• Incorrect positioning of both filters may cause lower performance and possible damage to the hairdryer.
• Do not use the hairdryer without filter, the dirt into the motor may affect the lifespan of the motor.