G4M GA-100H, User Manual, Page: 8 / 12

RETURN SEND CH/REV
MONO MONO
POWER INPUT: 220-240VAC, 50-60Hz
POWER CONSUMPTION: 120W
FUSE: T2A 250V
PARALLEL
OUTPUT
MAX OUTPUT 120W @ 4Ohm
EFFECTS FOOT SW
MADE IN CHINA SERIAL NO.:
DRIVE CLEAN
INPUT
BOOST
GA-100H
VOLUME BASS TREBLE GAIN CONTOUR BASS TREBLE VOLUME REVERB AUX IN CH.SEL
8
Overview
16. AC INPUT
Connect the included IEC power cable here to power the head. The fuse should only be
replaced with a one of an identical type and rating.
17. PARALLEL OUTPUT
These outputs allow you to connect the head to up to two cabinets. Please note the
minimum impedance load is 4 Ω.
18. RETURN
Use this input to receive signal from the output of your pedalboard back into the head.
19. SEND
Use this output to the send signal from the amplifier to the input of your head.
20. FOOTSWITCH
Use the input socket to connect a dual footswitch. This can be used to alternate between
the clean and drive channels, as well as engage/disengage the reverb channel.
17 18 19 20
16
17