G21 Tornado, Manual

Page: 8 / 48

Specifications
The English version of the manual is an exact translation of the original manufacturer‘s instructions.
Images used in this manual are for illustrational purposes only and may differ from the actual product.
Problem Possible cause Solution
Burner won’t light • Tank is frosted over
• Blockage in orifice
• Control knob is not in ON
position
• Wait until the tank warms up
and is defrosted
• Clear blockage
• Turn control knob to ON
Burner flame is low • Gas pressure is low
• Outdoor temperature is
less than 4ºC and tank is
less than 1/4 full
• Control knob fully ON
• Turn tank valve OFF and
replace tank
• Use a full tank
• Check burner and orifices for
blockage
Carbon build-up
Thick black smoke • Dirt or film on reflector
and burner screen
• Blockage in burner
• Clean reflector and burner
screen
• Remove blockage and clean
burner inside and outside
Troubleshooting
Technical details:
Appliance category: 3+(28-30/37) 3B/P(30) 3B/P(50) 3B/P(37)
Type of gas: Butane Propane
Butane,
propane,
their mixture Butane,
propane, their
mixture Butane,
propane, their
mixture
Gas pressure:
28 - 30
mbar
37 mbar 30 mbar 50 mbar 37 mbar
Outlet pressure of the
regulator: 30
mbar
37 mba 30 mbar 50 mbar 37 mbar
Thermal power: 13 kW (945 g/h)
Gas Pressure Main Opening Opening of Burner
280/300 2,0 mm 0,18
370 1,80 mm 0,18
500 1,80 mm 0,18
0063/21