EN - 32
FM stereo option
You can choose between stereo or mono reception when listening to FM radio. Mono may improve
clarity where stereo signals are weak. To change between Stereo or Mono reception:
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘Audio Setting’.
•
Select between ‘Stereo Allowed’ or ‘Forced Mono’.
USING THE AUX INPUT
You can use the aux input play any music from your phone or tablet. Connect the line out or
headphone socket of your auxiliary device to the Aux In socket using a suitable cable.
Selecting the Aux input: Press repeatedly the SOURCE button to select “AUX“. On your auxiliary
device, start to play the content that you selected on your auxiliary device.
USING THE BLUETOOTH
You can use Bluetooth to wirelessly connect to a device, such as a mobile phone or tablet. You can
then stream music from your mobile phone or tablet through. The first time you connect a Bluetooth
device, you need to pair them. After you‘ve paired a device , remembers it for the next time.
Listening to a Bluetooth device
•
Press the SOURCE button to select “Bluetooth“.
•
On your Bluetooth device switch Bluetooth on, find
DAB 700 BTC
and connect.
•
Select your favorite song, tap the PLAY button on your Bluetooth device or the button on the
device to play or pause the song from your Bluetooth device.
•
Press the or button to select the Next or Previous track.
•
If you want to pair (link) the device with another Bluetooth device, press and hold the BT PAIR
button a few seconds. The device will go into Pairing/Discoverable mode.
Note: For more information, see your Bluetooth device‘s user manual. If you are asked to enter a passcode, enter 0000.
Disconnecting a Bluetooth device
To disconnect a Bluetooth device, do one of the following:
Press SOURCE to switch to digital radio or FM radio. Switch off Bluetooth on the connected device.
SETTING ALARMS AND TIMERS
Setting an alarm
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘System settings’ >’Alarm’.
•
From the ‘Alarm’ menu, turn and press the SELECT to select either ‘Alarm 1’ or ‘Alarm 2’.
•
Press SELECT to turn ‘Alarm’ to ‘On’.
•
Turn and press the SELECT to change the ‘Frequency‘.
•
Select ‘Wake Up time’ by turning and pressing the SELECT, turn the dial to adjust the hours and
minutes, pressing SELECT to confirm each section.
•
Turn and press the SELECT to select ‘Source’. Turn and press the SELECT to choose between
‘Buzzer’, ‘Digital Radio’ or ‘FM’, then press the SELECT to confirm.
•
If you’ve chosen ‘Digital Radio’ or ‘FM’ radio, turn and press the SELECT to select ‘Preset’. To play
the station you last listened to, turn and press the SELECT to select ‘Last listened’ or turn and
press the SELECT to choose a radio station from the preset list.
Note: Skip this step if you are setting a Buzzer alarm.
•
Turn and press the SELECT to select ‘Duration’. Turn and press the SELECT to set the duration
that the alarm will sound in minutes.
•
Turn and press the SELECT to select ‘Volume’. Turn and press the SELECT to set the volume of
the alarm.
