EN - 31
USING RADIO PRESETS
You can store up to 30 digital radio and 30 FM radio stations for quick access.
To quick-store a station to a PRESET button (1-3)
Tune to the digital or FM radio station you want to store. Press and hold one of the numbered
PRESET buttons (1-3) for two seconds until you see a message to confirm that the preset has been
stored.
To store a station to the preset list (4-30)
Tune to the digital or FM radio station you want to store. Hold the PRESET 4+ button to view the
numerical list of stored presets, then turn and press the SELECT knob to choose any Preset number
between 4 and 30. You can overwrite existing presets.
To recall a preset when listening to digital radio or FM radio
•
To tune to presets 1 to 3, press the corresponding numbered button on the front panel.
•
To access presets 4 to 30 on the front panel press the PRESET 4+ button, turn the SELECT knob
right or left to scroll through the list of presets, then press the SELECT knob to choose to the
selected preset.
DAB SETTINGS
Note: You can only see the DAB settings when you have selected ‘DAB’ as the radio source.
DAB Scan
You can use the ‘DAB Scan’ (auto tune) function to automatically scan for new digital radio stations
and remove inactive ones.
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘DAB Scan’.
The number of stations found will be displayed during the auto tune. When the auto tune has
finished, the last station that you were listening to. If the last station you were listening to is no longer
available, will tune into the first station in the alphabetical list.
Manual tuning
Enable manual Tune for DAB stations.
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘Manual tune’.
•
Turn and press the SELECT to choose the channel.
Prune
Remove all “invalid” stations, marked with”?”
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘Prune’ and then press to confirm.
FM RADIO SETTINGS
Note: You can only see the FM radio settings when you have selected ‘FM’ as the radio source.
FM scan
You can choose whether automatically stops at the next available FM station or the next available
FM station with a strong signal when scanning for an FM station. To change the FM scan setting:
•
Press and hold the MENU button to view the main menu.
•
Turn and press the SELECT to choose ‘Scan Setting’.
•
Select between ‘Strong Stations Only’ or ‘All Stations’
