G-Tools G-kit Bonanza Bench Installation Instructions Manual Download Page 6

Page: 6 / 8

2. The air inlets

Each air inlet consists of 2 parts.

-Push part 1 inwards through the hole in the back.
-Push part 2 on part 1 and twist & lock.

3. Setting the timer

Set the switch on the right side of the timer at the clock symbol.

Set the current time by turning the dial of the timer.

The pins in the outer ring mean:

Positioned outside – OFF
Positioned inside – ON

Set the timer for lights ON by pushing the pins inward

Summary of Contents for G-kit Bonanza Bench

Page 1: ...G kit Bonanza Bench Model ___________________________________________________________________ Installation instructions Versie Eng 2018 9 ...

Page 4: ...th 4 aluminium profiles These profiles serve no further purpose and can be thrown away evestig jj Push the 4 aluminium feet on the plastic connectors underneath the bottom panel Push the 4 angle profiles 100cm on the connectors Place the back panel and side panels Install the air inlets more details on how to install the inlets in chapter 2 ...

Page 5: ...mm hole in the back panel of the cabinet and mount the supplied plug Push the air grid through the hole in the back panel in to the silencer From outside to within Hang the lamp set the timer chapter 3 and place the doors chapter 4 The door with the aluminium profile and weather strip slides through the rail in the back so the strip seals the gap where the doors overlap ...

Page 6: ...part 2 on part 1 and twist lock 3 Setting the timer a Set the switch on the right side of the timer at the clock symbol b Set the current time by turning the dial of the timer c The pins in the outer ring mean Positioned outside OFF Positioned inside ON Set the timer for lights ON by pushing the pins inward ...