6-12
G-Tek Corporation
Operation
6.2
P
ROCESS
A
RMING
-D
ISARMING AND PARTIAL
D
ISARMING
:
GSM Dialer support arming, Disarming, and partial disarming using special command send by admin.
That command is sent in text message whose command format is shown in figure 9 that message GSM
accept if command sent by only admin.
If system under disarming mode it stop accepting any
upcoming alert until it get arm command. If GSM accept
arming command it start accepting upcoming alerts and also
starts servicing if pending any alert(s).
Partial disarming is one of the best remotely automated
disarming feature. Admin send partial disarm command with
defined time duration in minutes, system get disarm according
to time request from admin then automatic arm. If any
pending alerts remains before acceptation of partial disarm
command it automatic starts services pending work once it
come back in arm mode.
The important thing is it accept arming-disarming and partial
disarming request only if request sent from selected three
admin number and after acceptation of request it give
response back through message string with specifying
requested number.
Sr.
No
Command
for…
Code Start
Character
Code Number
Command
index
start Char
Index No
Code End
Character
1
Arming
#
123
*
01*00
#
2
Disarming
#
123
*
02*00
#
Definitions and Description of Commands used in GSM Dialer
3
Partial
Disarming
#
123
*
03*MM
#
Figure 9 Definitions and Description of Commands used in GSM Dialer
Set Minutes for Partial Disarm
Figure 8 Acknowledgement for Arming-
Disarming
