G-Tek 27 Series, Operating Manual

Page: 7 / 27

Page No . 5
5.3 T
ECHNICAL
D
ATA
Table 1 Technical data
Model No CR2010 Series; BBR Chart Recorder
Product Code* 27x03
Recording System
No. of Pens 1 – Suitable for marking on Pressure Sensitive Paper
Pen Marking Continuous
Pen Response Time <5Sec (Full Scale)
Pen Resolution Stepper Motor Controlled better than 0.1% FSD
Overshoot None
Chart
Chart Speed 7D/Rev
Chart Calibrated Radius 2.3" (approx. 59mm)
Chart Ranges Programmable
Display, Operator Panels and Input
Display Type 3½ digit LCD
Status Indicator RTC, Batch Status, Battery Status
Panel Keys Front panel KB consisting of 3 keys for programming and
calibration
Analog Input RTD PT-100
Sensor Type and Range Refer to Table 1
Scan Rate Continuous 1 reading per second
Memory
Memory Size 64KB
Data Storage Up to 14 days at 5min Store Interval
Alarm Records Yes (Going out of limit and coming back to limit is considered as
one alarm record)
Record for Door Open / Close Yes
Mains Failure Record Yes
Memory Type Cyclical – Most recent data is always available
User Settable Parameters for Recording
Alarm Condition Occurrence Time
Delay 1 to 99 mins; user settable (through PC)
When the temperature remains out of limit for more than set
time then only the alarm condition is assumed.
Real Time Clock (RTC) Settable from Keyboard in DD/MM/YY/HR/MN format
Door Open/Close Input through Potential Free contact.
Communication