G-Tech GL-6000L Series, Service Manual

Page: 28 / 36

28
10 Error Messages & Trouble Shooting Guide
If there is a problem with the scale, it displays error message for each
problem to facilitate inspection and repair.
Message Cause Solution
The object on the platform is too heavy to
exceed the maximum limit.
Remove the object on the platform.
An object is placed on the platform before
turning on the power. (when it exceeds 20%
of the maximum weight)
Empty the platform before turning on the
power.
There is a problem in load cell.
Refer to the
service center.
ZERO or TARE Keys are pressed only when
the scale is stable.
Check stabilization status when pressing
Keys.
The value of lower limit exceeds the value of
upper limit.
Make sure upper limit is higher than lower
limit.
The upper/lower limit value does not meet
the minimum graduation unit.
Set the upper/lower limit value to a multiple
of the minimum graduation unit.
The battery is exhausted. Replace battery.
The current weight is below ZERO.
Press ZERO Key.