Job Menu:
Operate Menu:
Page 16
1: In Main Menu scroll to OPERATE .
2: Quick Press “ON” to enter OPERATE Mode.
3: Use the
5
to display the following information types:
- AREA
- AREA sub (Reset this by holding down the
5
or
6
key)
- DISTANCE (Total distance travelled, combines the RUN and HOLD distances)
- WEIGHT of material spread for this job
- RATE, amount of hect per hour are being spread
- SPEED
- Spinner RPM
- Chain Left RPM
- Chain Right RPM
- All RPMs displayed on this screen
4a: Delete the displayed total by holding down
5
or
6
keys for 6 seconds.
4b: In Optional screens holding down the
5
or
6
for 6 sec turns the alarm on/off.
5: Use the
6
key if the"Run Hold Mode" is "Keys", to switch the Field Mate
into/out of Hold.
6: Quick press "ON to Exit to Main Menu.
Selecting a JOB:
This is done when a job is to be reset or restarted. A PRO has 16 jobs and there fore selecting
any of these jobs can be done by this method. A Job that has a "XX.XXX.XX" in the date location is an un allocated
job.
1: In the Main Menu scroll to JOB.
2: Quick Press “ON” to enter a JOB. Scroll to JOB using the
5
or
6
keys.
3: Hold
5
or
6
to select the job for adjusting.
4: Scroll to SELECT in the JOB SETUP screen Using
5
or
6
. At SELECT hold
5
or
6
to select the job.
This job will be the current Job that work is logged to. Date and Time renewed . Job Totals and Job Name remain
untouched.
Reset a JOB:
1: In Main Menu scroll to JOB.
2:Quick Press “ON” to enter JOB. Scroll to JOB using the
5
or
6
keys.
3: Hold
5
or
6
to select the job for adjusting.
4:Scroll to RESET in the JOB SETUP screen Using
5
or
6
.
5: At RESET hold
5
or
6
to reset the job. All Totals, Date, Time and Name for this job will be cleared.
Caution: Data cannot be recovered after this event.
Name a JOB:
1: In Main Menu scroll to JOB.
2: Quick Press “ON” to enter JOB. Scroll to JOB using the
5
or
6
keys.
3: Hold
5
or
6
to select the job for adjusting.
4: Scroll to NAME in the JOB SETUP screen Using
5
or
6
. At NAME hold
5
or
6
to name the job.
5: At the NAME job screen
5
will change letter,
6
will goto the next letter
space. A maximum of 11 letters can be entered.
6: Quick press “ON” to exit.
View a JOB:
1: In Main Menu scroll to JOB.
2: Quick Press “ON” to enter JOB. Scroll to JOB using the
5
or
6
keys.
3: Hold
5
or
6
to select the job for adjusting.
4: Scroll to VIEW in the JOB SETUP screen Using
5
or
6
. At VIEW hold
5
or
6
to select the job. Report screen will be displayed.
5 : Use
5
or
6
to scroll through the job report.
6: Quick press “ON” to exit. Viewing job does not unset the selected job.
7: When exiting to the Main Menu, the Job Report is set back to the Current Selected Job Number.
Summary of Contents for FIELD MATE
Page 6: ...Page 6...
