G-Tec AP160LCD, User Manual

Page: 14 / 67

11
5. Connection and operation
5.1 Inspection:
Inspect the packaging carton and its contents for damage. Please
inform the transport agency immediately should you find signs of
damage.
Please keep the packaging in a safe place for future use.
Note: Please ensure that the incoming feeder is isolated and
secured to prevent it from being switched back on again.
5.2 Connection:
(1) UPS Input Connection
If the UPS is connected via the power cord, please use a proper
socket with protection against electric current, and pay attention to
the capacity of the socket: over 10A for 1K(S) & 2K, over 16A for
2KS& 3K(S).
(2) UPS Output Connection
The output of 1K(S), 2K are socket-types only. Simply plug the
load power cord to the output sockets to complete connection.
Besides output sockets, 2KS, 3K/3KS and 6K/6KS have the
terminal block available for output as well.
The wiring configuration is shown as the following procedure:
The system may be installed and wired only by qualified
electricians in accordance with applicable safety regulations!
When installing the electrical wiring, please note the nominal
amperage of your incoming feeder.