G.T.Power A620, Operating Manual

Page: 7 / 29

- 4 -
3. Exterior of the unit
4. Warnings and safety notes
• Never leave the charge unsupervised when it is connected to its power supply. If any malfunction is observed immediately terminate
the process and refer to the operation manual.
• Keep away the unit from dust, damp, rain, heat direct sunshine and vibration. Do not dorp it.
• This unit and the battery to charge or discharge should be set up on a head-resistant, non-inflammable and non-conductive surface.
Never place them on a car seat, carpet or similar . Keep all the inflammable volatile materials well away from operating area.
• Be sure to understand the information of the battery to be charged or discharged accurately. If the program is set up incorrectly the
battery can severely be damaged. Especially Lithium battery can cause a fire or an explosion by over-charging.
• To avoid short-circuits between the charge lead, always connect the charge cable to the unit first and only then to the battery to be
Cooling fan
Balance socket
Cooling fan
Output port
Temperature
sensor port