Page 7
To set min speed, use the Faster button to just barely get the loco moving. Then use the Slower button to just
Stop it. Press Reverse to save the min speed (Speed must be less than 50% power supply voltage).
To set max speed, use the Faster and Slower buttons to run the loco at the desired speed. Press Forward to save
the max speed setting (Speed must be greater than 50% power supply voltage).
To return to default throttle settings (min speed = 0% voltage, max speed = 100% voltage), press the 2nd key to
save the default settings.
Press the Stop button to save the setting and exit throttle programming mode. LED will stop flashing. Note: Only
one setting, either Min or Max can be set at one time. Exit to save, then re-enter for the second setting.
